Re: [802SEC] +++ EC P&P Revision Ballot +++ compliance with SA Model P&P
Carl,
It will be at least a couple of days before my reading, comparing the
old and new versions and comment generation is complete.
wlq
"Stevenson, Carl R (Carl)" wrote:
>
> I was waiting to see Bill's comments ...
>
> Carl
>
> > -----Original Message-----
> > From: owner-stds-802-sec@LISTSERV.IEEE.ORG
> > [mailto:owner-stds-802-sec@LISTSERV.IEEE.ORG] On Behalf Of
> > Sherman, Matthew J. (US SSA)
> > Sent: Monday, June 14, 2004 2:25 PM
> > To: STDS-802-SEC@LISTSERV.IEEE.ORG
> > Subject: Re: [802SEC] +++ EC P&P Revision Ballot +++
> > compliance with SA Model P&P
> >
> >
> > Hi everyone,
> >
> > FYI, tomorrow is the last day to vote, and so far Bill's is
> > the only vote I have received.
> >
> > Thanks,
> >
> > Mat
> >
> > Matthew Sherman, PhD
> > Senior Member Technical Staff
> > BAE SYSTEMS, CNIR
> > Office: +1 973.633.6344
> > email: matthew.sherman@baesystems.com
> >
> >
> >
> > -----Original Message-----
> > From: owner-stds-802-sec@LISTSERV.IEEE.ORG
> > [mailto:owner-stds-802-sec@LISTSERV.IEEE.ORG]On Behalf Of
> > Bill Quackenbush
> > Sent: Monday, June 14, 2004 2:24 PM
> > To: STDS-802-SEC@LISTSERV.IEEE.ORG
> > Subject: Re: [802SEC] +++ EC P&P Revision Ballot +++
> > compliance with SA Model P&P
> >
> >
> > Matt,
> >
> > I vote DISAPPROVE with comments to follow.
> >
> > Thanks,
> >
> > wlq
> >
> > "Sherman, Matthew J. (US SSA)" wrote:
> > >
> > > Dear EC members,
> > > This email initiates a EC P&P Revision Ballot. The ballot
> > opens today
> > > - May 15, 2004 and closes June 15, 2004 at 11:59 PM Eastern
> > Daylight Time. (Remember if you do not vote or abstain on
> > this ballot it is equivalent to a DISAPPROVE vote). Buzz,
> > please ensure this gets sent to the "802ALL" email list as
> > well. WG chairs, if you haven't already done so, please
> > invite your WG members to comment through you. Attached you
> > will find a zip file containing:
> > > 1) A P&P Revision cover letter
> > >
> > (802.0-Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.pdf)
> > > 2) Text for the P&P revision
> > > (SA_Model_compliant_LMSC_P&P_040514.doc)
> > > 3) A mapping of text from the "old" P&P to the "new" P&P
> > >
> > > (LMSC_P&P-March_2004_R0_reformat-map_040514.doc)
> > > The scope of this P&P revision is to bring the LMSC P&P
> > into "editorial" conformance with the SA Model Sponsor P&P.
> > That is to match the format of the SA model Sponsor P&P, but
> > not to add or deleted any "governance" content from the
> > current LMSC P&P. (I use the term "Governance" here is sense
> > analogous to the term "normative" in standardese.) This
> > letter ballot was approved at the Friday, March 19, 2004 EC
> > meeting. The rationale for the changes being balloted are as
> > given in the attached cover letter.
> > > The actual changes are given in the second document listed
> > above. The changes are made in Word track changes mode
> > against the SA model Sponsor P&P
> > (http://standards.ieee.org/board/aud/sponsmod.rtf). Normally,
> > I would provide a pdf of the changes rather than a word
> > document, but I have placed embedded comments in the file,
> > and don't know how to maintain them in pdf format. While
> > this is a set of "editorial changes" to bring our P&P into
> > the same overall format as the SA model P&P, the changes are
> > very extensive, and a number of issues for future P&P are
> > noted. Please review the changes closely. I expect I will
> > have additional recommendations for editorial changes prior
> > to the close of this ballot. Note that all embedded comments
> > will be removed from the document once approved, prior to
> > formal release. The comments are there to highlight issues
> > that have arisen during the reformatting process that will
> > have to be addressed in a future ballot as I believe them to require
> > > governance changes.
> > > Note that a reformat map is provided in the third document
> > listed above. It is a heavily commented version of the
> > current P&P that indicates where in the "New P&P" each
> > section of text from the "old P&P" gets mapped. It will help
> > the reader to confirm that I have neither added nor deleted
> > anything other than editorial content in reformatting the P&P.
> > > Regards,
> > > Mat
> > > PS - Note that because of corporate firewall issues, I have
> > renamed the zip file extension to "renamed_zip". Prior to
> > attempting to open the zip file you should change the file
> > extension back to "zip". If anyone has problems opening the
> > file please contact me and I will provide the contents in
> > uncompressed form.
> > >
> > >
> > >
> > <<Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.renamed_zi
> > > p>>
> > >
> > > Matthew Sherman, PhD
> > > Senior Member Technical Staff
> > > BAE SYSTEMS, CNIR
> > > Office: +1 973.633.6344
> > > email: matthew.sherman@baesystems.com
> > >
> > > ----------
> > > This email is sent from the 802 Executive Committee email
> > reflector.
> > > This list is maintained by Listserv.
> > >
> > >
> > --------------------------------------------------------------
> > ----------
> > >
> > Name:
> > Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.renamed_zip
> > >
> > Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.rena
> > med_zip Type: unspecified type (application/octet-stream)
> > >
> > Encoding: base64
> > >
> >
> > > Description:
> > >
> > Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.renamed_zip
> >
> > ----------
> > This email is sent from the 802 Executive Committee email
> > reflector. This list is maintained by Listserv.
> >
> > ----------
> > This email is sent from the 802 Executive Committee email
> > reflector. This list is maintained by Listserv.
> >
>
> ----------
> This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.