Re: [802SEC] +++ EC P&P Revision Ballot +++ compliance with SA Model P&P
I was waiting to see Bill's comments ...
Carl
> -----Original Message-----
> From: owner-stds-802-sec@LISTSERV.IEEE.ORG
> [mailto:owner-stds-802-sec@LISTSERV.IEEE.ORG] On Behalf Of
> Sherman, Matthew J. (US SSA)
> Sent: Monday, June 14, 2004 2:25 PM
> To: STDS-802-SEC@LISTSERV.IEEE.ORG
> Subject: Re: [802SEC] +++ EC P&P Revision Ballot +++
> compliance with SA Model P&P
>
>
> Hi everyone,
>
> FYI, tomorrow is the last day to vote, and so far Bill's is
> the only vote I have received.
>
> Thanks,
>
> Mat
>
> Matthew Sherman, PhD
> Senior Member Technical Staff
> BAE SYSTEMS, CNIR
> Office: +1 973.633.6344
> email: matthew.sherman@baesystems.com
>
>
>
> -----Original Message-----
> From: owner-stds-802-sec@LISTSERV.IEEE.ORG
> [mailto:owner-stds-802-sec@LISTSERV.IEEE.ORG]On Behalf Of
> Bill Quackenbush
> Sent: Monday, June 14, 2004 2:24 PM
> To: STDS-802-SEC@LISTSERV.IEEE.ORG
> Subject: Re: [802SEC] +++ EC P&P Revision Ballot +++
> compliance with SA Model P&P
>
>
> Matt,
>
> I vote DISAPPROVE with comments to follow.
>
> Thanks,
>
> wlq
>
> "Sherman, Matthew J. (US SSA)" wrote:
> >
> > Dear EC members,
> > This email initiates a EC P&P Revision Ballot. The ballot
> opens today
> > - May 15, 2004 and closes June 15, 2004 at 11:59 PM Eastern
> Daylight Time. (Remember if you do not vote or abstain on
> this ballot it is equivalent to a DISAPPROVE vote). Buzz,
> please ensure this gets sent to the "802ALL" email list as
> well. WG chairs, if you haven't already done so, please
> invite your WG members to comment through you. Attached you
> will find a zip file containing:
> > 1) A P&P Revision cover letter
> >
> (802.0-Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.pdf)
> > 2) Text for the P&P revision
> > (SA_Model_compliant_LMSC_P&P_040514.doc)
> > 3) A mapping of text from the "old" P&P to the "new" P&P
> >
> > (LMSC_P&P-March_2004_R0_reformat-map_040514.doc)
> > The scope of this P&P revision is to bring the LMSC P&P
> into "editorial" conformance with the SA Model Sponsor P&P.
> That is to match the format of the SA model Sponsor P&P, but
> not to add or deleted any "governance" content from the
> current LMSC P&P. (I use the term "Governance" here is sense
> analogous to the term "normative" in standardese.) This
> letter ballot was approved at the Friday, March 19, 2004 EC
> meeting. The rationale for the changes being balloted are as
> given in the attached cover letter.
> > The actual changes are given in the second document listed
> above. The changes are made in Word track changes mode
> against the SA model Sponsor P&P
> (http://standards.ieee.org/board/aud/sponsmod.rtf). Normally,
> I would provide a pdf of the changes rather than a word
> document, but I have placed embedded comments in the file,
> and don't know how to maintain them in pdf format. While
> this is a set of "editorial changes" to bring our P&P into
> the same overall format as the SA model P&P, the changes are
> very extensive, and a number of issues for future P&P are
> noted. Please review the changes closely. I expect I will
> have additional recommendations for editorial changes prior
> to the close of this ballot. Note that all embedded comments
> will be removed from the document once approved, prior to
> formal release. The comments are there to highlight issues
> that have arisen during the reformatting process that will
> have to be addressed in a future ballot as I believe them to require
> > governance changes.
> > Note that a reformat map is provided in the third document
> listed above. It is a heavily commented version of the
> current P&P that indicates where in the "New P&P" each
> section of text from the "old P&P" gets mapped. It will help
> the reader to confirm that I have neither added nor deleted
> anything other than editorial content in reformatting the P&P.
> > Regards,
> > Mat
> > PS - Note that because of corporate firewall issues, I have
> renamed the zip file extension to "renamed_zip". Prior to
> attempting to open the zip file you should change the file
> extension back to "zip". If anyone has problems opening the
> file please contact me and I will provide the contents in
> uncompressed form.
> >
> >
> >
> <<Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.renamed_zi
> > p>>
> >
> > Matthew Sherman, PhD
> > Senior Member Technical Staff
> > BAE SYSTEMS, CNIR
> > Office: +1 973.633.6344
> > email: matthew.sherman@baesystems.com
> >
> > ----------
> > This email is sent from the 802 Executive Committee email
> reflector.
> > This list is maintained by Listserv.
> >
> >
> --------------------------------------------------------------
> ----------
> >
> Name:
> Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.renamed_zip
> >
> Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.rena
> med_zip Type: unspecified type (application/octet-stream)
> >
> Encoding: base64
> >
>
> > Description:
> >
> Compliance_with_SA_Model_P&P-Balloted_P&P_Revision_ballot.renamed_zip
>
> ----------
> This email is sent from the 802 Executive Committee email
> reflector. This list is maintained by Listserv.
>
> ----------
> This email is sent from the 802 Executive Committee email
> reflector. This list is maintained by Listserv.
>
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.