RE: [802SEC] +++ 802 EC motion +++ IEEE 802.3ak Type 10GBASE-CX4 news r

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Dear SEC members,

This ballot closes the sooner of 3PM EST Friday 21, 2004 or when all EC
members have cast a vote. Below is the tentative tally--if I have missed
your vote, please resend it to me.

Everyone please remember to cast your ballot.

Regards,

--Paul Nikolich

  Vote categories:         DIS    DNV    APP    ABS
  -------------------------------------------------
  01 Geoff Thompson                       APP
  02 Mat Sherman                  DNV
  03 Buzz Rigsbee                         APP
  04 Bob O'Hara                           APP
  05 Bill Quackenbush      DIS**
  06 Tony Jeffree                         APP*
  07 Bob Grow                             APP
  08 Stuart Kerry                         APP
  09 Bob Heile                            APP
  10 Roger Marks                          APP
  11 Mike Takefman                DNV
  12 Carl Stevenson                       APP
  13 Jerry Upton                          APP

                     total: -01- -02-    -10- -00-

*(recommends minor reword)
**(trademark indications need correction)

> ---- Original Message -----
> From: "Paul Nikolich" <paul.nikolich@att.net>
> To: "IEEE802" <stds-802-sec@ieee.org>
> Cc: <k.mccabe@ieee.org>
> Sent: Wednesday, February 11, 2004 2:36 PM
> Subject: [802SEC] +++ 802 EC motion +++ IEEE 802.3ak Type 10GBASE-CX4 news
> release
>
>
> > Dear EC members,
> >
> > This is a 10 day SEC email ballot to make a determination by EC motion to
> > approve the attached Press Release. Please note I have placed a modifier
> > on the closing time of the ballot such that it may close no later than 10
> > days after the start of the email ballot or as soon 24 hours after every
> > member of the EC casts a definitive ballot (APP, DIS or ABS). The reason
> > for the modifier is to allow the press release, if it is approved, to be
> > issued as quickly as possible.
> >
> > Motion
> > The LMSC executive committee approves of the attached press release on the
> > ratification of the IEEE 802.3ak Type 10GBASE-CX4 ammendment by the
> > Standards Board.
> >
> > Moved by :        Bob Grow
> > Seconded by:    Roger Marks
> >
> > The email ballot opens on Wednesday February 11 2004 3PM EST and closes
> the
> > sooner
> > of February 21 3PM EST or 24 hours after every member of the EC has cast
> a
> > ballot, whichever comes
> > first.
> >
> > Please direct your responses to the EC reflector with a CC directly to me
> > (p.nikolich@ieee.org).
> >
> > Regards,
> >
> > - Paul Nikolich
> > Chairman, IEEE 802 LMSC
> >
> >
> > ----- Original Message -----
> > From: <k.mccabe@ieee.org>
> > To: <paul.nikolich@att.net>
> > Cc: <bob.grow@ieee.org>
> > Sent: Wednesday, February 11, 2004 11:33 AM
> > Subject: IEEE 802.3ak news release
> >
> >
> >
> > Paul,
> >
> >
> > The attached draft of the IEEE 802.3ak press release for 10 gigabit
> > Ethernet on copper wire has been approved by Bob Grow and Dan Dove. It
> has
> > also been blessed by the communications people at HP ProCurve, Dan's
> > organization. It can now ready to go to the 802 EC for approval.
> >
> >
> > Thanks!
> >
> >
> >
> >
> >
> > (See attached file: PR_802.1ak_fin.doc)
> >
> >
> > Karen McCabe
> > Senior Marketing Manager, IEEE Standards
> > 445 Hoes Lane, PO Box 1331
> > Piscataway NJ 08855 USA
> > PH: +1 732 562 3824
> > email: k.mccabe@ieee.org
> > http://standards.ieee.org
> >
>

RE: [802SEC] +++ 802 EC motion +++ IEEE 802.3ak Type 10GBASE-CX4 news release: TENTATIVE TALLY