Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [802SEC] +++ 802 EC motion +++ IEEE 802.3ak Type 10GBASE-CX4 news release




Approve (with or without Tony's recommended change, though I will
forward it as a publication recommendation to IEEE staff).

--Bob Grow

> -----Original Message-----
> From: owner-stds-802-sec@majordomo.ieee.org [mailto:owner-stds-802-
> sec@majordomo.ieee.org] On Behalf Of Paul Nikolich
> Sent: Wednesday, February 11, 2004 11:37 AM
> To: IEEE802
> Cc: k.mccabe@ieee.org
> Subject: [802SEC] +++ 802 EC motion +++ IEEE 802.3ak Type 10GBASE-CX4
news
> release
> 
> Dear EC members,
> 
> This is a 10 day SEC email ballot to make a determination by EC motion
to
> approve the attached Press Release.  Please note I have placed a
modifier
> on the closing time of the ballot  such that it may close no later
than 10
> days after the start of the email ballot or as soon 24 hours after
every
> member of the EC casts a definitive ballot (APP, DIS or ABS).  The
reason
> for the modifier is to allow the press release, if it is approved, to
be
> issued as quickly as possible.
> 
> Motion
> The LMSC executive committee approves of the attached press release on
the
> ratification of the IEEE 802.3ak Type 10GBASE-CX4 ammendment by the
> Standards Board.
> 
> Moved by :        Bob Grow
> Seconded by:    Roger Marks
> 
> The email ballot opens on Wednesday February 11 2004 3PM EST and
closes
> the
> sooner
> of  February 21 3PM EST or 24 hours after every member of the EC has
cast
> a
> ballot, whichever comes
> first.
> 
> Please direct your responses to the EC reflector with a CC directly to
me
> (p.nikolich@ieee.org).
> 
> Regards,
> 
> - Paul Nikolich
> Chairman, IEEE 802 LMSC
> 
> 
> ----- Original Message -----
> From: <k.mccabe@ieee.org>
> To: <paul.nikolich@att.net>
> Cc: <bob.grow@ieee.org>
> Sent: Wednesday, February 11, 2004 11:33 AM
> Subject: IEEE 802.3ak news release
> 
> 
> 
> Paul,
> 
> 
> The attached draft of the IEEE 802.3ak press release for 10 gigabit
> Ethernet on copper wire has been approved by Bob Grow and Dan Dove.
It
> has
> also been blessed by the communications people at HP ProCurve, Dan's
> organization.  It can now ready to go to the 802 EC for approval.
> 
> 
> Thanks!
> 
> 
> 
> 
> 
> (See attached file: PR_802.1ak_fin.doc)
> 
> 
> Karen McCabe
> Senior Marketing Manager, IEEE Standards
> 445 Hoes Lane, PO Box 1331
> Piscataway NJ 08855 USA
> PH: +1 732 562 3824
> email: k.mccabe@ieee.org
> http://standards.ieee.org