Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802SEC] recirculations allowed with a conditional approval.



This was originally covered in the chair’s guidelines  by an interpretation (11/11/2010, at 3.1), but is now in the lmsc operations manual (sec 12, Approved 17 March 2022).

The short answer is up to 2 recirculations may be performed after requesting conditional approval.  The relevant section of the operations manual is below (emphasis added to show that there is one “subsequent” recirculation ballot allowed, and if they are not met the approval terminates).

 

12. Procedure for conditional approval to forward a draft standard

This procedure is to be used when approval to forward a draft standard to sponsor ballot or to

RevCom is conditional on successful completion of a Working Group or sponsor recirculation

ballot, respectively.

Conditional approval is only appropriate when ballot resolution efforts have been substantially

completed and the approval ratio is sufficient. "Substantially complete" is when there is a very

low likelihood of receiving valid new Disapprove comment(s)/vote(s) upon the next recirculation

ballot. If the requirements for conditional approval have not been met at end of that recirculation

ballot, then one subsequent recirculation ballot may be conducted in an attempt to meet the

conditional approval conditions. If the conditions are not met by the subsequent recirculation

ballot, the conditional approval terminates. Conditional approval expires at the opening of the

next Plenary Session.

 

 

George A. Zimmerman, Ph.D.

2nd Vice Chair, IEEE 802 LAN/MAN Standards Committee

CME Consulting, Inc.

george@cmephyconsulting.com

1-310-920-3860

 


To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1