So why not the 3pm ET slot then? Alternating in and out of the am sweet spot doesn’t resolve the issue.
BR,
Clint
From: Glenn Parsons <glenn.parsons@ericsson.com>
Sent: Monday, November 1, 2021 7:33 AM
To: cpowell@ieee.org; STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: RE: [802SEC] 802.1 technical plenary
Thanks Clint,
I picked this slot as it is currently the most equitable across all time zones. But that is also why there are multiple calls in this slot.
That said, the 9am ET slot is poor for Australia.
The World Clock Meeting Planner - Results (timeanddate.com)
Which is why we moved the EC slot to 3pm ET. But that slot is poor for the rest of Asia (but there are no EC members from Asia).
Another alternative is that we could alternate slots, as I plan to hold a series of these.
Cheers,
Glenn
From: Clint Powell <clintonpowell@ymail.com> On Behalf Of Clint Powell
Sent: Friday, October 29, 2021 7:01 PM
To: Glenn Parsons <glenn.parsons@ericsson.com>; STDS-802-SEC@LISTSERV.IEEE.ORG
Cc: Clint Powell <cpowell@ieee.org>
Subject: RE: [802SEC] 802.1 technical plenary
Glenn,
Thank you for the notification. I would like to suggest holding this plenary later in the day – during a time similar to the monthly EC calls. Myself as well as many others are overly inundated with multiple parallel calls in the 8am-11am Eastern time slot. I’m sure we’d all like to be as focused as possible during this important series of meetings.
Best Regards,
Clint
Facebook - Wireless Consultant
Clinton Powell – Managing Director/Sr. Consultant
1563 W Kaibab Dr | Chandler, AZ 85248
M: 480 586-8457 S: clintonpowell
SCE - Wireless Consultant
IEEE 802.15 Vice Chair
IEEE 802.15 Secretary
IEEE 802.15.14 SG NS-UWB Chair
Connectivity Standards Alliance - IEEE 802.15.4 PHY/MAC Advisory Group Chair
Connectivity Standards Alliance - Matter CSG Certification Policy & Procedure Tiger Team Lead
Connectivity Standards Alliance - Access Control Work Group Steering Committee At-Large Member
From: ***** IEEE 802 Executive Committee List ***** <STDS-802-SEC@listserv.ieee.org> On Behalf Of Glenn Parsons
Sent: Friday, October 29, 2021 3:19 PM
To: STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: [802SEC] 802.1 technical plenary
Colleagues,
Based on some offline discussions with Paul and others, I would like to restart the 802.1 technical plenaries to kick off a wider discussion on the 802 Overview & Architecture, as well as address cross 802 issues.
To avoid conflict during the busy virtual November plenary, the first in the series will be on Dec 2nd from 9-11am ET.
This series of meetings would:
- Provide wider awareness for the need to revise IEEE Std 802
- Provide an opportunity to discuss the content – notably should it be the same or should it add more architecture
- Provide examples of the current 802 architecture (i.e., spread around in 802, .1Q, .1AC, .3, .11, .15.x, …)
- Identify gaps in the current architecture
In addition, this would provide the opportunity to discuss technical points across all WGs, for example:
- MAC service interface (and its support of 802 MAC/PHYs)
- 48 and 64 bit bridging
- Protocol IDs and their encoding – Length/Type and LLC
Topics for discussion are invited and should be proposed to the 802.1 WG chair. The agenda and topics for the first meeting will be posted 14 days in advance.
Attendance is open to all 802 WG participants. To ensure all WGs are represented, 802 WG chairs are invited to identify at least one voting member to attend the technical plenary.
I would encourage you to inform your WGs about the technical plenary: https://1.ieee802.org/technical-plenary/
I will introduce this as well during the EC meeting on Nov 5th.
Cheers,
Glenn.
--
Glenn Parsons
Chair, IEEE 802.1 WG
+1-514-379-9037
To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1
To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1