[802SEC] Working Group ballot of P802.1CMde/D1.0
Colleagues:
I enclose the announcement of the 802.1 Working Group ballot of 802.1CMde/D1.0, Time-Sensitive Networking for Fronthaul - Amendment: Enhancements to Fronthaul Profiles to Support New Fronthaul Interface, Synchronization, and Syntonization Standards.
Best regards,
-- John
-----Original Message-----
From: List HELP only <hdk.1-oeyo8vs4@hjkeen.net> On Behalf Of Janos Farkas
Sent: 26 July 2019 15:47
To: STDS-802-1-L@LISTSERV.IEEE.ORG
Subject: [802.1 - 13340] Working Group ballot of P802.1CMde/D1.0
External email: [owner-stds-802-1-l@listserv.ieee.org]
......................................................................
Ballot due August 19: P802.1DC/D1.0
For particulars see
https://1.ieee802.org/active-ballots/
Working Group 802.1 Web pages: https://1.ieee802.org/
802.1 list help: https://1.ieee802.org/email-lists/
-----
NOTE: ALL BALLOT RESPONSES MUST BE SENT TO THE BALLOT RESPONSE LIST:
STDS-802-1-ballot@listserv.ieee.org
This Email is attached to an official 802.1 Working Group ballot form for P802.1CMde/D1.0 - Time-Sensitive Networking for Fronthaul - Amendment: Enhancements to Fronthaul Profiles to Support New Fronthaul Interface, Synchronization, and Syntonization Standard. As this is a full Working Group ballot, only 802.1 voting members and ex-officio members are entitled to vote. However, any non-voting participants in the activities of 802.1 may submit a "Comment Only" ballot on the draft. In accordance with established practice in 802 and the IEEE, all comments received, whether from voters or non-voters, are given due consideration during the Ballot resolution process.
NOTE: As this is a formal WG ballot, if you vote "Approve" you are stating that, in your professional opinion, you consider the document to be technically complete, and ready for Sponsor ballot. Hence, sending in an "Approve" ballot response within a small number of minutes of the ballot start time cannot possibly mean that the voter has given the document the level of professional consideration necessary to make such a judgment.
The 802.1 voting members that are entitled to a vote on this ballot are as follows (NOTE: for a WG ballot, the voting population is fixed at the start of the ballot, and does not change during any subsequent recirculation ballots, regardless of any membership changes over the course of the balloting cycle):
Ademaj, Astrit
Assmann, Ralf
Bierschenk, Jens
Boiger, Christian
Bottorff, Paul
Chen, Feng
Cheng, Weiying
Congdon, Paul
Cummings, Rodney
Dorr, Josef
Elbakoury, Hesham
Enzinger. Thomas
Farkas, Janos
Fedyk, Donald
Finn, Norman
Garner, Geoffrey
Gunther, Craig
Gutierrez, Marina
Haddock, Stephen
Hantel, Mark
Holness, Marc
Itaya, Satoko
Ito, Yoshihiro
Karl, Michael
Kehrer, Stephan
Kelsey, Randy
Koto, Hajime
Lawlis, James
Mangin, Christophe
Mansfield, Scott
Maruhashi, Kenichi
McMillan, Larry
Messenger, John
Mustala, Tero
Myers, Roy
Ohsawa, Tomoki
Ohue, Hiroshi
Pannell, Donald R
Parsons, Glenn
Potts, Michael
Qiu, Wei
Randall, Karen
Riegel, Maximilian
Rouyer, Jessy
Sato, Atsushi
Schewe, Frank
Seaman, Michael
Seewald, Maik
Specht, Johannes
Stanica, Marius
Steindl, Guenter
Wang, Xinyuan
Wang, Tongtong
Wang, Hao
Weber, Karl
Weis, Brian
Winkel, Ludwig
Woods, Jordon
Yamaura, Takahiro
Zein, Nader
Zweck, Harald
It should be noted that the ongoing retention of 802.1 voting rights is predicated on active participation in Working Group ballots. Active participation is defined to be returning ballot responses in two out of the last three Working Group ballots. The 802 WG Rules allow abstention for any cause other than "lack of technical expertise" to be treated as though it were a failure to respond to a ballot.
The closing date of this ballot is:
2nd September 2019
The PDF file of P802.1CMde/D1.0 can be found at:
http://www.ieee802.org/1/files/private/de-drafts/d1/802-1CMde-d1-0.pdf
The comment disposition for the previous ballot is here:
http://www.ieee802.org/1/files/private/de-drafts/d0/802-1CMde-d0-2-dis-v01.pdf
If you have any difficulty downloading or reading this file, let me know.
As is normal with such ballots, comments should specify not only what problems have been identified with the text, but also what the commenter proposes as a solution.
Any comments accompanying the ballot must be presented using either of the templates to be found here:
http://www.ieee802.org/1/files/private/commenting-tool/MyBallot-tools/
Please ensure that you are using one of the latest templates referenced by the link above, not a template from a prior ballot, and have completed the Affiliation entry.
Comments can be generated using Excel or an equivalent spreadsheet program that will read XLS or CSV format files. Attach the resultant file, in XLS or CSV format, to your ballot response email. The Editor would appreciate the attached comment file clearly identify the commenter's name, project and draft number. The following file name format is suggested:
<project id>-d<draft id>-comments-<yourname>.xls
RETURNING YOUR BALLOT FORM
==========================
Your ballot must be returned to:
STDS-802-1-ballot@listserv.ieee.org
You are requested to use (exactly!) the appropriate Subject line from the following set when returning your ballot. Please send your ballot with the Subject line explicitly set, rather than using the Reply function in your mailer.
P802.1CMde/D1.0 - Approve
P802.1CMde/D1.0 - Comments (with approve)
P802.1CMde/D1.0 - Disapprove
P802.1CMde/D1.0 - Comments (with abstain)
P802.1CMde/D1.0 - Abstain
Regards,
János Farkas
IEEE 802.1 TSN TG Chair.
******************************
Ballot form follows.....
******************************
------------------------------------------------------------------------
------------------------------------------------------------------------
NOTE: EMAIL ALL BALLOT RESPONSES ONLY TO:
STDS-802-1-ballot@listserv.ieee.org
------------------------------------------------------------------------
------------------------------------------------------------------------
==========================
P802.1CMde/D1.0 EMAIL BALLOT
==========================
TO: János Farkas, Editor, P802.1CMde
SUBJECT: P802.1CMde/D1.0 - Time-Sensitive Networking for Fronthaul - Amendment: Enhancements to Fronthaul Profiles to Support New Fronthaul Interface, Synchronization, and Syntonization Standard
_____ I Approve (may attach non-binding comments below) _____ I Disapprove (must attach binding comments below) _____ I Abstain for the following reasons (may attach non-binding comments below):
______ Lack of Time
______ Lack of Expertise
______ Other: _______________________________________________
____________________________________________
(Name)
____________________________________________
(Affiliation)
---------------------------------------------------------------------
INCLUDE COMMENTS ONLY AS AN ATTACHMENT, USING THE TEMPLATES IDENTIFIED ABOVE.
IF THERE IS NO AFFILIATION IN THE TEMPLATE, IT IS A WRONG ONE!
===
Unsubscribe link: mailto:STDS-802-1-L-SIGNOFF-REQUEST@LISTSERV.IEEE.ORG
IEEE. Fostering technological innovation and excellence for the benefit of humanity.
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.