Re: [802SEC] +++ EC Consent Agenda items - 802.1 +++
James,
1. Yes, P802.1X-Rev/D1.4 was the last version to be balloted in the WG (a WG recirculation ballot). No comments were received on the ballot, and no changes made as a result.
2. 802.1Qcx/D1.2 was the last version to be balloted in the WG. It received comments which were resolved by making changes to the draft. At the end of the comment resolution, no Disapprove votes remained. The recirculation is to allow the ballot pool to verify that their comments have been satisfactorily resolved and the resolutions correctly applied.
3. 802.1 TGs do not have membership distinct from the membership of the WG. Comment resolution will be performed on TSN TG calls and at meetings of the TSN TG, but there is no separate CRG distinct from the WG membership. We do not require that level of formality. Any WG member, and any 802.1 participant, is free to join the calls and meetings at which comment resolution is performed. We avoid holding votes in TGs, and resolution of comments is a consensus process. We do not express it in these terms, but you might choose to look at this as a CRG comprising a committee of the whole. (This answer applies both to 802.1Qcx and 802.1AS-Rev.)
4. Regarding the wording of the disposition of the 802.1AS-Rev REJECTed comments you refer to, I agree that the disposition could have been better worded, by explicitly stating that the group chose not to accept the suggested change, considering it unnecessary (as well as what they did say). Although you state that the committee did not take exception to the suggested remedy, in fact it did, and this is expressed through the word REJECT in the disposition. While there's no requirement for a comment to point out an error, it is also true that the commenter did not point one out, and that the committee doesn't have to accept suggestions which improve the draft. What they were saying is "if it ain't broke, don't fix it". However the committee does need to properly respond to comments, and I will inform the members of the need to properly respond and clearly state their reasons, especially during the later stages of the balloting process and to be particularly careful at SA !
ballot. Please give your opinion as to whether there is a significant risk of this causing problems at RevCom, because if so, I would consider withdrawing, or changing, this motion.
Thanks for giving me a chance to answer your questions, rather than Jessy Rouyer having to answer them during the closing LMSC meeting.
Cheers,
-- John
-----Original Message-----
From: James P. K. Gilb <Gilb_IEEE@yahoo.com>
Sent: 17 July 2019 16:26
To: John Messenger <jmessenger@advaoptical.com>; STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: Re: [802SEC] +++ EC Consent Agenda items - 802.1 +++
External email: [Gilb_IEEE@yahoo.com]
......................................................................
John
A few questions:
P802.1X-Rev-D1.4 to Standards Association Ballot - Is D1.4, the revision we are forwarding the last version balloted?
P802.1Qcx
- Why is there a recirculation ballot?
- Ballot resolution will be by the TSN TG, does the 802.1 WG intend to empower a comment resolution group (CRG) to make decisions to resolve comments from the recirculation?
P802.1AS-Rev
- Same question regarding CRG.
- Two of the unsatisfied comments were rejected with: "The commenter does not point outn any errors in the draft. The suggested changes run a significant risk of introducing errors in test that has been reviewed by the committee."
There is no requirement that a comment point out an error in the draft.
A comment can be any requested change to the draft, including changes to improve it. The commenter states "wouldn't this be better", clearly indicating that the comment is to improve the draft and implementation.
There is a detailed suggested remedy, for which the committee has not taken exception, so I would be led to believe that it is adequate to make a change.
It appears that it is the committee that "did not point out any errors"
in the proposed remedy, but rather they state, without additional justification, that there is a "significant risk of introducing errors"
Thanks for providing the documents early for review.
James Gilb
-
On 7/17/19 4:02 AM, John Messenger wrote:
> Please find at:
> https://mentor.ieee.org/802-ec/dcn/19/ec-19-0121-00-00EC-802-1-consent
> -agenda-items-lmsc-closing.pptx
>
>
> --
> John Messenger
> Director, Global Standards
> ADVA Optical Networking Ltd
> ADVAntage Houe, Tribune Way, York YO30 4TN, UK
>
>
> ----------
> This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.
>
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.