Re: [802SEC] Scope and CSD re-approval of the P802.3cg project
Dear IEEE 802 EC members,
I will let the IEEE P802.3cg leadership address the technical concerns that Mr Thompson has. As IEEE 802.3 Chair I however wanted to make you aware of the steps that have been taken within IEEE 802.3 to ensure that the concerns raised receive as broad consideration as possible within the IEEE 802.3 Working Group. I also wanted to provide you with the current status of the ballot.
Best regards,
David
-----
The concerns below have been presented to the Working Group balloting group (in substantially similar form) as unsatisfied comments since the initial ballot, please see <http://www.ieee802.org/3/cg/comments/index.html>. In addition, Mr Thompson was given the opportunity to present his concerns during the November 2018 IEEE 802.3 Working Group closing plenary meeting as part of the IEEE P802.3cg meeting report, please see <http://www.ieee802.org/3/minutes/nov18/1118_cg_close_report.pdf#page=12>.
As a result of the discussion after the presentation at the November 2018 IEEE 802.3 Working Group closing plenary, the IEEE P802.3cg Task Force leadership agreed to provide a presentation at the January 2019 IEEE 802.3 Interim meeting series. This presentation provided background on the project and in particular the grounds for disagreeing technically with the assertions made by Mr Thompson. This presentation was arranged at a time when no other IEEE 802.3 activity was meeting to ensure all IEEE 802.3 meeting series attendees had the opportunity to attend without competing demands on their time. I encourage you to access this presentation at <http://www.ieee802.org/3/cg/public/Jan2019/Tutorial_cg_0119_final.pdf>, in particular, slides 28 to 33.
The ballot results from the initial Working Group ballot through the 3rd Working Group recirculation ballot are provided in the table below. Please note that the IEEE P802.3cg Task Force held an interim meeting on 19th and 20th February 2019 in addition to meeting during the January 2019 IEEE 802.3 Interim meeting series. This has enabled two completed recirculation ballots, the 2nd and 3rd, since November 2018 when the concerns were presented at the IEEE 802.3 Working Group closing plenary. I have also included the current results of the ongoing IEEE P802.3cg/D2.4 10 Mb/s Single Pair 4th Ethernet Working Group recirculation ballot as an additional row to the table. As I announced to the IEEE 802 EC reflector, this ballot will close on Friday 8th March 2019 at 23:59 AOE <http://www.ieee802.org/secmail/msg23179.html>.
Please note that every ballot notice included the text 'One of the responsibilities as a balloter is to ensure that draft is consistent with the criteria for standards development (CSD) responses which are available at <https://mentor.ieee.org/802-ec/dcn/18/ec-18-0079-00-ACSD-802-3cg.pdf>. An Approve vote indicates your agreement that the draft is consistent with the CSD responses.'.
+------------+-----------+--------+----------+-----+-----+-----+--------+----------+---------+----------+
| Stage | Close | Voters | Returned | App | Dis | Abs | Return | Approval | Abstain | Comments |
+------------+-----------+--------+----------+-----+-----+-----+--------+----------+---------+----------+
| Initial | 15-Aug-18 | 249 | 139 | 100 | 24 | 15 | 55.82% | 80.65% | 10.79% | 739 |
| 1st recirc | 26-Oct-18 | 249 | 150 | 115 | 20 | 15 | 60.24% | 85.19% | 10.00% | 502 |
| 2nd recirc | 18-Dec-18 | 249 | 156 | 131 | 9 | 16 | 62.65% | 93.57% | 10.26% | 351 |
| 3rd recirc | 09-Feb-19 | 249 | 164 | 142 | 4 | 18 | 65.86% | 97.26% | 10.98% | 128 |
+------------+-----------+--------+----------+-----+-----+-----+--------+----------+---------+----------+
| 4th recirc | 08-Mar-19 | 249 | 170 | 148 | 3 | 19 | 68.27% | 98.01% | 11.18% | 0 |
+------------+-----------+--------+----------+-----+-----+-----+--------+----------+---------+----------+
-----
From: ***** IEEE 802 Executive Committee List ***** [mailto:STDS-802-SEC@LISTSERV.IEEE.ORG] On Behalf Of Geoff Thompson
Sent: 28 February 2019 23:19
To: STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: Re: [802SEC] Scope and CSD re-approval of the P802.3cg project
Colleagues-
This is to complete my action item resulting from the following Conference Call item:
8.00
II
Scope and CSD re-approval of the P802.3cg project -- a heads up
Thompson
5
02:23 PM
Thompson gave verbal update. There was discussion regarding Thompson’s update.
I promised to provide material on the topic in advance of the EC Meetings in Vancouver so you would be prepared for discussion there. I asked to hold off on sending out such material until after the interim to see if any progress was made on my issues. That meeting was held last week. While some progress was made, things are not yet resolved. There were proposals at the close of that meeting to make some changes in the project documentation (PAR, CSD plus the project objectives which are internal to 802.3) but I haven't seen any proposals yet.
THE PROJECT and TITLE
P802.3cg Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors
THE PROJECT SCOPE
5.2.b. Scope of the project: Specify additions to and appropriate modifications of IEEE Std 802.3 to add 10 Mb/s Physical Layer (PHY) specifications and management parameters for operation, and associated optional provision of power, using a single balanced pair of conductors.
And, as per our 802 Operations Manual 9.2
The CSD statement shall be reviewed and approved by the WG and the Sponsor as part of the approval process for the following:
• Forwarding the PAR to NesCom
• As part of the WG ballot to assure the draft is consistent with the CSD
• Forwarding the draft to Sponsor ballot
• Forwarding the draft to RevCom
It is this review for "Forwarding the draft to Sponsor ballot" that is expected to be on the EC agenda in Vancouver.
The issue: I do not feel that the draft is consistent with the project documentation (PAR, CSD plus the project objectives which are internal to 802.3)
THOMPSON ISSUES WITH THE PROJECT
PAR
Thompson asserts that the addition of PLCA (what the project has labeled: Physical Layer Collision Avoidance) belongs by statements elsewhere in 802 (Ref: 5.2.3) and 802.3 (Ref: 1.1.3) in the Media Access Control (MAC) Sublayer. Thompson asserts that since "PLCA" provides MAC functionality, it belongs in the MAC sublayer and is thus out of scope for the approved PAR
The Task Force and text placement in the draft asserts that PLCA is in the Physical Layer and that is where it belongs (Largely, I believe, for ease of early implementation integration with existing silicon).
CSD items
General
There was no mention whatsoever in the PAR, CSD or the project objectives that a new Media Access Control method would integral or even part of this project
Broad Market Potential
There is no mention of access method, old or new having an impact either way on the Broad Market Potential. That would seem to preclude introducing a new access method without notice.
Compatibility
The statement "The proposed amendment will conform to the IEEE 802.3 MAC" is not true. The Ethernet MAC is only used when the new MAC doesn't preclude its operation with its new access method either by disabling it or by a fault operation. Its half-duplex shared media operation is CSMA/CA, not the CSMA/CD with which Ethernet is so closely identified.
Distinct Identity
This one is tricky. I assert that the project is not asserting what should be its very distinct identity as something other than Ethernet. What is in the CSD is just the usual boilerplate for Physical Layer speeds and feeds. When the proposed network is in "PLCA" mode it has more in common with 802.4 or 802.12 than it does with Ethernet. I believe it needs a name and a separate standard to fully leverage its distinct identity. This is a challenge since 802.3 is the only wired group left in 802. For this reason I think development and maintenance of the new standard should operate within 802.3.
POSSIBLE OUTCOMES
THOMPSON'S ISSUES ARE UPHELD
• Draft is modified to conform to project paperwork (this would be the case if PLCA is removed from the draft)
• PAR & CSD are modified to describe the draft being developed
THOMPSON'S ISSUES ARE NOT UPHELD
• >50% of the EC decides that Thompson is wrong or his opinion doesn't matter or ???
• EC decides that this review is not procedural and removes this requirement because it is "technical"
OTHER POSSIBILITIES
• No decision, stalls start of Sponsor Ballot
• Some compromise crops up which makes things better
DISCLAIMER
I have no ax to grind here about product. I care that we follow our rules, I think they are there for a reason. I care that Ethernet means Ethernet instead of any wired LAN. I do think that a PLCA standard should be developed with a distinct identity.
REFERENCES:
P802.3cg PAR http://www.ieee802.org/3/cg/P802_3cg_PAR_140518.pdf
P802.3cg CSD https://mentor.ieee.org/802-ec/dcn/18/ec-18-0079-00-ACSD-802-3cg.pdf
P802.3cg Objectives http://www.ieee802.org/3/cg/objectives_3cg_0318.pdf
P802.3cg Draft http://www.ieee802.org/3/cg/private/8023cg_D2p4.pdf
P802.3cg TF web area http://www.ieee802.org/3/cg/
Thank you,
Geoff
Geoffrey O. Thompson
IEEE 802 Executive Committee
GraCaSI S.A.
Mountain View, CA 94043-5286
<thompson@ieee.org>
+1.540.227.0059
________________________________________
To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.