Re: [802SEC] Maintenance PAR - 802.1X-rev
Colleagues,
I am not sure this is required for a maintenance PAR, but since it was revised based on comments received, here is the response to those comments:
http://www.ieee802.org/1/files/public/docs2018/x-rev-seaman-PAR-CSD-comment-response-0318.txt
Cheers,
Gelnn.
-----Original Message-----
From: Glenn Parsons
Sent: Wednesday, March 07, 2018 12:53 PM
To: 'STDS-802-SEC@LISTSERV.IEEE.ORG' <STDS-802-SEC@LISTSERV.IEEE.ORG>
Subject: RE: Maintenance PAR - 802.1X-rev
Folks,
Based on comments received, the proposed PAR for a revision of IEEE Std 802.1X is posted at:
http://www.ieee802.org/1/files/public/docs2018/x-rev-seaman-draft-par-0318-v03.pdf
Cheers,
Glenn.
-----Original Message-----
From: Glenn Parsons
Sent: Monday, March 05, 2018 5:39 PM
To: STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: Maintenance PAR - 802.1X-rev
Folks,
A proposed PAR for a revision of IEEE Std 802.1X is posted at:
http://www.ieee802.org/1/files/public/docs2018/x-rev-seaman-draft-par-0218-v01.pdf
This is a maintenance PAR to roll-up amendments into the base standard with no new functionality added -- i.e., no CSD requirement and pre-circulate up to 48 hours before the closing EC.
This is for consideration at the Friday EC.
Cheers,
Glenn.
--
Glenn Parsons - Chair, IEEE 802.1
mailto:glenn.parsons@ericsson.com
+1-613-963-8141
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.