Re: [802SEC] +++ECM: IEEE Std 802.3bw-2015 100BASE-T1 approval press release
I approve
At 08:02 AM 11/20/2015, you wrote:
Hi Geoff,
Thank you for the suggestions. I've attached an updated draft which I
hope captures your suggested changes correctly, along with a couple of
changes staff requested to the contact information.
Best regards,
David
-----
From: Geoff Thompson
[
mailto:thompsongeoff@rocketmail.com]
Sent: 20 November 2015 01:58
To: Law, David <dlaw@hpe.com>
Cc: Geoff Thompson <thompsongeoff@rocketmail.com>;
STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: Re: [802SEC] +++ECM: IEEE Std 802.3bw-2015 100BASE-T1 approval
press release
David-
I would like to reword paragraph #2 which currently reads:
"Mainstream adoption of emerging in-car applications such as
advanced driver assistance systems (ADAS) and infotainment has created
the need for cost-effective, high-bandwidth connectivity. IEEE Std
802.3bw-2015 100BASE-T1 will provide 100 Mb/s Ethernet over a single
twisted-pair and is intended to enable the consolidation of these new, as
well as legacy, in-car applications on a homogenous network
architecture."
To something more like:
"Mainstream adoption of emerging in-car applications such as
advanced driver assistance systems (ADAS) and infotainment has created
the need for cost-effective, high-bandwidth connectivity.
Ethernet fills that need.
The first of several Ethernet standards especially tuned to the needs of
the in-car automotive market, IEEE Std 802.3bw-2015 100BASE-T1 will
provide 100 Mb/s Ethernet over a single twisted-pair.
It is intended to enable the consolidation of these new, as well as
legacy, in-car applications on a homogenous network
architecture."
(Feel free to remove the extra carriage returns. They were only
added for ease of comparison.)
I think that moving the brand "Ethernet" up in the paragraph
and letting folks know that this is only the first of a series of
releases is a worthwhile addition.
I hope this helps.
Best regards,
Geoff
Thompson
On Nov 19, 2015, at 6:15 AMPST, Law, David <dlaw@HPE.COM>
wrote:
All,
I would like to now proceed to the EC electronic ballot on the attached
updated draft IEEE Std 802.3bw-2015 100BASE-T1 approval press release I
circulated on Monday 9th November for comment. I've also attached a diff
to the draft I circulated then, my thanks to those that provided
comments.
Best regards,
David
Motion
======
The EC supports the press release to announce the approval of the IEEE
Std 802.3bw-2015 100BASE-T1 standard, to be released with editorial
changes as deemed necessary.
Move: David Law
Second: John D'Ambrosia
Start of ballot: Friday 20th November
Close of ballot: Sunday 29th November, 11:59PM AOE
Early close: As required in subclause 4.1.2 'Voting rules' of the IEEE
802 LAN/MAN Standards Committee (LMSC) Operations Manual, this is notice
that, to ensure the release is provided in a timely manner, this ballot
may close early once sufficient responses are received to clearly decide
a matter. Sufficient responses to clearly decide this matter will be
based on the required majority for a motion under subclause 7.1.1
'Actions requiring approval by a majority vote' item (h), 'Other motions
brought to the floor by members (when deemed in order by the Sponsor
Chair)' of the IEEE 802 LAN/MAN Standards Committee (LMSC) Policies and
Procedures.
----------
This email is sent from the 802 Executive Committee email
reflector. This list is maintained by Listserv.
<IEEE-SA_IEEE802 3bw_191115.pdf><IEEE-SA_IEEE802
3bw_191115_CB.pdf>
----------
This email is sent from the 802 Executive Committee email
reflector. This list is maintained by Listserv.
Tim Godfrey
tim.godfrey@ieee.org
mobile 913-706-3777
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.