Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
FYI a new WG ballot has been initiated. Cheers, Glenn. From: Glenn
Parsons NOTE: ALL BALLOT RESPONSES SHOULD BE SENT TO THE NEW BALLOT RESPONSE LIST:
STDS-802-1-ballot@listserv.ieee.org PLEASE! This Email is attached to an official 802.1 Working Group ballot form
for P802.1Qca/D1.1 - Bridges and Bridged Networks-Amendment: Path
Control and Reservation. As this is a full Working Group ballot, only
802.1 voting members and liaisons are entitled to vote; however, any
non-voting participants in the activities of 802.1 may submit a "Comment
Only" ballot on the draft. In accordance with established practice in
802 and the IEEE, all comments received, whether from voters or
non-voters, are given due consideration during the Ballot resolution
process. NOTE: As this is a formal WG ballot, if you vote "Approve" you are
stating that, in your professional opinion, you consider the document to
be technically complete, and ready for Sponsor ballot (i.e., the
document is essentially ready for publication, apart from final editing
for style, etc.). Hence, sending in an "approve" ballot response within
a small number of minutes of the ballot start time cannot possibly mean
that the voter has given the document the level of professional
consideration necessary to make such a judgment. I believe the record so
far was less than 10 minutes between posting the draft and ballot
announcement, and receiving the first "Approve" - and that was on a
document that contained Editor's notes indicating areas where work
needed to be done! The 802.1 voting members that are entitled to a vote on this ballot are
as follows (NOTE: for a WG ballot, the voting population is fixed at the
start of the ballot, and does not change during any subsequent
recirculation ballots, regardless of any membership changes over the
course of the balloting cycle): Ao, Ting Boiger, Christian Bottorff, Paul Chen, David Cheng, Weiying Crupnicoff, Diego Cummings, Rodney Diamond, Patrick Diarra, Aboubacar Kader Farkas, Janos Finn, Norman Garner, Geoffrey Ghanwani, Anoop Goetz, Franz Gravel, Mark Gray, Eric Gunther, Craig Haddock, Stephen Hayakawa, Hitoshi Hitt, Jeremy Hussain, Rahil Jeffree, Anthony Jochim, Markus Johas Teener, Michael Jones, Peter Keen, Hal Kiessling, Marcel Klein, Philippe Korhonen, Jouni Lynch, Jeff Mack-Crane, Ben McIntosh, James Messenger, John Moldovansky, Anatoly Multanen, Eric Pannell, Donald Parsons, Glenn Randall, Karen Riegel, Maximilian Romascanu, Dan Rouyer, Jessy Saltsidis, Panagiotis Sarikaya, Behcet Seaman, Michael Sexton, Daniel Specht, Johannes Stanton, Kevin Steiner, Wilfried Thaler, Patricia Touve, Jeremy Weber, Karl Wei, Yuehua Weis, Brian Woods, Jordon Zuniga, Juan Carlos It should be noted that the ongoing retention of 802.1 voting rights is
predicated on active participation in Working Group ballots. Active
participation is defined to be returning ballot forms in two out of the
last three Working Group ballots. The 802 Operating Rules allow
abstention for any cause other than "lack of technical expertise" to be
treated as though it were a failure to respond to a ballot. 802.1
applies this rule. The closing date of this ballot is: 26th October 2014 The PDF file of P802.1Qca/D1.1 can be found at: http://www.ieee802.org/1/files/private/ca-drafts/d1/802-1Qca-d1-1.pdf Comments should be made against the version of the draft above. The MIB
text file is included as an attachment to the PDF. The comment disposition for the previous ballot is here: http://www.ieee802.org/1/files/private/ca-drafts/d1/802-1Qca-d1-0-dis-v01.pdf If you have any difficulty downloading or reading these files, let me know. As is normal with such ballots, comments should specify not only what
problems have been identified with the text, but also what the commenter
proposes as a solution. Any comments accompanying the ballot must be presented using either of
the templates to be found here: http://www.ieee802.org/1/files/private/commenting-tool/MyBallot-tools/ Comments can be generated using Excel or an equivalent spreadsheet
program that will read XLS or CSV format files. Attach the resultant
file, in XLS or CSV format, to your ballot response email. RETURNING YOUR BALLOT FORM ========================== Your ballot must be returned to: STDS-802-1-ballot@listserv.ieee.org You are requested to use (exactly!) the appropriate Subject line from
the following set when returning your ballot. Please send your ballot
with the Subject line explicitly set, rather than using the Reply
function in your mailer. P802.1Qca/D1.1 - Approve P802.1Qca/D1.1 - Comments (with approve) P802.1Qca/D1.1 - Disapprove P802.1Qca/D1.1 - Comments (with abstain) P802.1Qca/D1.1 - Abstain Regards, Glenn Parsons 802.1 WG Chair ****************************** Ballot form follows..... ****************************** ------------------------------------------------------------------------ ------------------------------------------------------------------------ NOTE: EMAIL ALL BALLOT RESPONSES ONLY TO: STDS-802-1-ballot@listserv.ieee.org ------------------------------------------------------------------------ ------------------------------------------------------------------------ ========================== P802.1Qca/D1.1 EMAIL BALLOT ========================== TO: János Farkas, Editor, P802.1Qca SUBJECT: P802.1Qca/D1.1 - Bridges and Bridged Networks-Amendment: Path
Control and Reservation _____ I Approve (may attach non-binding comments below) _____ I Disapprove (must attach binding comments below) _____ I Abstain for the following reasons (may attach non-binding
comments below): ______ Lack of Time ______ Lack of Expertise ______ Other: _______________________________________________ ____________________________________________ (Name) ____________________________________________ (Telephone No.) --------------------------------------------------------------------- INCLUDE COMMENTS ONLY AS AN ATTACHMENT, USING THE TEMPLATES IDENTIFIED
ABOVE. |