[802SEC] 802.3bd PAR for Priority-based Flow Control MAC Control Frame
Resending with a correction too the PAR designation. The two letter designation should have been "bd" not "ad".
-----Original Message-----
From: ***** IEEE 802 Executive Committee List ***** [mailto:STDS-802-SEC@ieee.org] On Behalf Of Pat Thaler
Sent: Tuesday, February 03, 2009 2:35 PM
To: STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: [802SEC] 802.3ad PAR for Priority-based Flow Control MAC Control Frame
This proposed PAR is to add a MAC Control Frame to IEEE 802.3 to support 802.1Qbb Priority-based Flow Control. Note that the 802.1 Working Group will be responsible for this PAR. As usual when doing a cross group PAR, 802.3 voters who request it will be added to the Working Group voting pool on this project.
The PAR is at:
http://www.ieee802.org/1/files/public/docs2008/bb-thaler-pfc-frame-par-1108.pdf
Since this PAR is to support the 802.1Qbb PAR, the same 5 criteria applies to it:
http://www.ieee802.org/1/files/public/docs2008/new-dcb-thaler-draft-pfc-5c-0208-v3.pdf
I've updated the PAR number on My Project to 802.3bd, but my hard drive crashed Monday and apparently Acrobat wasn't loaded onto my new drive correctly so I wasn't able to create a pdf with the update. That is the only change from the pdf above.
Regards,
Pat
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.