Re: [802SEC] EC Email Ballot: 802.17b Revised PAR to NesCom
Carl,
thanks for the warning, I will check it out and make
sure I am on the current form. If not, I appreciate
the trust and I'll transpose properly.
regards,
mike
-------------------------------------------
Michael Takefman tak@cisco.com
Distinguished Engineer, Cisco Systems
Chair IEEE 802.17 Stds WG
3000 Innovation Dr, Ottawa, Canada, K2K 3E8
voice: 613-254-3399 cell:613-220-6991
> -----Original Message-----
> From: ***** IEEE 802 Executive Committee List *****
> [mailto:STDS-802-SEC@ieee.org] On Behalf Of Carl R. Stevenson
> Sent: Tuesday, September 12, 2006 7:15 AM
> To: STDS-802-SEC@listserv.ieee.org
> Subject: Re: [802SEC] EC Email Ballot: 802.17b Revised PAR to NesCom
>
> Seems reasonable to me ... Approve.
>
> One question ... Is it on the "latest and greatest" PAR form
> ??? (Just be sure, as I got caught by a link to the "2006 PAR
> Form" on the IEEE website that pointed to the now-outdated
> form that was replaced in April.)
>
> If necessary, I have no problem in trusting Mike to
> faithfully transpose the new document title to the latest PAR
> form, changing nothing else, and submit.
>
> Carl
>
>
> > -----Original Message-----
> > From: ***** IEEE 802 Executive Committee List *****
> > [mailto:STDS-802-SEC@ieee.org] On Behalf Of Mike Takefman (tak)
> > Sent: Monday, September 11, 2006 9:00 PM
> > To: STDS-802-SEC@listserv.ieee.org
> > Subject: [802SEC] EC Email Ballot: 802.17b Revised PAR to NesCom
> >
> > Dear EC Members,
> >
> > The following 10-day ballot was authorized by Paul Nikolich
> and I have
> > been asked to manage it.
> >
> > Background: During Sponsor Ballot (D2.0) a comment was
> received that
> > highlighted a title error in P802.17b as well as its associate PAR
> > form. The Comment Resolution Group voted unanimously
> > (5:0:0) to make a change to title of the standard and to change the
> > PAR form and then run an 802.17 confirmation email ballot and an EC
> > email ballot. You will find attached the new PAR form and you will
> > note the change to the title of the standard is the only change.
> > The reason for requesting this change outside of a plenary
> is that by
> > doing so now, we will just make NesCom's continuous
> processing window
> > for this cycle and will allow us to forward 802.17b to
> RevCom during
> > the November plenary.
> >
> > I ran an 802.17 email ballot and all voting members replied in the
> > affirmative (10:0:0) and John Hawkins agreed to second the
> following
> > motion.
> >
> > Move that the 802 EC forwards the revised PAR for P802.17b
> to NesCom
> > for continuous processing in time for the September 23rd cutoff.
> >
> > Moved: Takefman
> > Seconded: Hawkins
> >
> > Ballot starts September 11, 2006 (9pm Eastern) Ballot ends
> September
> > 21, 2006 (11:59pm AOE)
> >
> >
> > thank you,
> >
> > mike
> >
> >
> > -------------------------------------------
> >
> > Michael Takefman tak@cisco.com
> > Distinguished Engineer, Cisco Systems
> > Chair IEEE 802.17 Stds WG
> > 3000 Innovation Dr, Ottawa, Canada, K2K 3E8
> > voice: 613-254-3399 cell:613-220-6991
> >
> > ----------
> > This email is sent from the 802 Executive Committee email
> reflector.
> > This list is maintained by Listserv.
> >
>
> ----------
> This email is sent from the 802 Executive Committee email
> reflector. This list is maintained by Listserv.
>
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.