[802SEC] Liaison to ITU-T on Ethernet rings
- To: STDS-802-SEC@listserv.ieee.org
- Subject: [802SEC] Liaison to ITU-T on Ethernet rings
- From: "Mike Takefman (tak)" <tak@CISCO.COM>
- Date: Thu, 9 Mar 2006 19:55:18 -0500
- Reply-To: "Mike Takefman (tak)" <tak@CISCO.COM>
- Thread-Index: AcZDulgogwuJJDjuT2eLG3krcD+3xgACEDtAAAaBYkA=
- Thread-Topic: Liaison to ITU-T on Ethernet rings
Dear EC Members,
Please find attached the Liaison Response Letter
to ITU-SG15 that was sent to 802.1 and 802.17.
This response is being sent by 802.1 and 802.17 and
is NOT intended as a position of 802.
Therefore as per the P&P, this is being sent to
the EC as a heads-up, but does not require EC
approval.
I have requested a II slot should anyone wish to
discuss this letter.
cheers,
mike
-------------------------------------------
Michael Takefman tak@cisco.com
Distinguished Engineer, Cisco Systems
Chair IEEE 802.17 Stds WG
3000 Innovation Dr, Ottawa, Canada, K2K 3E8
voice: 613-254-3399 cell:613-220-6991
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.
Liaison-EthernetRing v3.doc