Re: [802SEC] Fwd: Re: Initiating a ballot invitation
Would we not also want all the WG vice chairs to be able to initiate ballots too?
-----Original Message-----
From: owner-stds-802-sec@LISTSERV.IEEE.ORG
[mailto:owner-stds-802-sec@LISTSERV.IEEE.ORG]On Behalf Of Tony Jeffree
Sent: Friday, March 18, 2005 11:52 AM
To: STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: [802SEC] Fwd: Re: Initiating a ballot invitation
Paul -
See attached. If any of the WG chairs are to be in a position to properly
use MyBallot, then you are going to have to set up the necessary
authorizations.
Regards,
Tony
>Envelope-to: tony@jeffree.co.uk
>Reply-To: sa-ballot@ieee.org
>Subject: Re: Initiating a ballot invitation
>To: ANTHONY A JEFFREE <tony@jeffree.co.uk>
>Cc:
>X-Mailer: Lotus Notes Release 5.0.12 February 13, 2003
>From: p.stanton@ieee.org
>Date: Fri, 18 Mar 2005 14:46:57 -0500
>X-MIMETrack: Serialize by Router on Buzz/US/IEEE(Release 5.0.12 |February
>13, 2003) at
> 03/18/2005 02:46:58 PM
>
>
>Comments/Response to Case ID: 00661675
>
>ReplyTo: sa-ballot@ieee.org
>
>
> From: Penny Stanton Date:
> 03/18/2005
>
>
>
>
>
>
> Subject: Re: Initiating a Send To: ANTHONY A
> JEFFREE
> ballot
> invitation <tony@jeffree.co.uk>
>
>
> cc:
>
>
>
>
>
>
>Mr. Jeffree:
>
>To initiate a ballot invitation, you need the link, "Submit Invitation
>Request." If you do not see this link, it is because Mr. Nikolich has not
>assigned you as a "Designee" for this project -- when he assigns you, you
>will receive a confirmation email. Then, when you log onto myBallot, the
>system will recognize you as a designee and will give you access to the
>Sponsor Control Panel containing the link, "Submit Invitation Request."
>
>Also, note that when you are assigned as a Designee, you will be provided
>with two control panels when you log on to myBallot -- a "sponsor control
>panel" and a "myBallot control panel." Each control panel gives you
>different views and contains access to different actions -- you simply
>click on the link on one or the other on the control panel to toggle
>between them. When you are on the myBallot control panel, it is for your
>use as a balloter (say, for example, you wanted to join a balloting group)
>and thus you won't have access to submitting an invitation request since
>balloters are not given that function. To submit an invitation request
>which is a sponsor/designee function, ensure that you are on the Sponsor
>Control Panel to access the link for "Submit Invitation Request."
>
>Thank you.
>
>
>
>
>
>IEEE SA Balloting Center Staff
>
>==========ATTENTION myBallot is coming soon!=========================
>The new IEEE-SA Balloting System is coming soon! Go to
>http://standards.ieee.org/sa/ballotnews.html for more information.
>
>Hi -
>
>As Chair of 802.1 I need to initiate a ballot invitation but I cannot see
>anywhere in MyBallot where I can do this. Can you tell me where to look
>please?
>
>Regards,
>Tony
Regards,
Tony
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.