Re: [802SEC] +++ 802 EC motion +++ IEEE 802.3ak Type 10GBASE-CX4 newsrelease

[stuart.kerry@philips.com]

Approve

/Stuart
_______________________________

Stuart J. Kerry
Chair, IEEE 802.11 WLANs WG

Philips Semiconductors, Inc.
1109 McKay Drive, M/S 48A SJ,
San Jose, CA 95131-1706,
United States of America.

Ph  : +1 (408) 474-7356
Fax: +1 (408) 474-5343
Cell: +1 (408) 348-3171 
eMail: stuart.kerry@philips.com
_______________________________

Geoff Thompson <gthompso@nortelnetworks.com> Sent by: owner-stds-802-sec@majordomo.ieee.org 02/11/2004 16:23

To:        "Paul Nikolich" <p.nikolich@ieee.org>         cc:        "IEEE802" <stds-802-sec@ieee.org> <k.mccabe@ieee.org> (bcc: Stuart Kerry/SVL/SC/PHILIPS)         Subject:        Re: [802SEC] +++ 802 EC motion +++  IEEE 802.3ak Type  10GBASE-CX4 news release         Classification:

APPROVE


At 02:36 PM 2/11/2004 -0500, Paul Nikolich wrote:
>Dear EC members,
>
>This is a 10 day SEC email ballot to make a determination by EC motion to
>approve the attached Press Release.  Please note I have placed a modifier
>on the closing time of the ballot  such that it may close no later than 10
>days after the start of the email ballot or as soon 24 hours after every
>member of the EC casts a definitive ballot (APP, DIS or ABS).  The reason
>for the modifier is to allow the press release, if it is approved, to be
>issued as quickly as possible.
>
>Motion
>The LMSC executive committee approves of the attached press release on the
>ratification of the IEEE 802.3ak Type 10GBASE-CX4 ammendment by the
>Standards Board.
>
>Moved by :        Bob Grow
>Seconded by:    Roger Marks
>
>The email ballot opens on Wednesday February 11 2004 3PM EST and closes the
>sooner
>of  February 21 3PM EST or 24 hours after every member of the EC has cast a
>ballot, whichever comes
>first.
>
>Please direct your responses to the EC reflector with a CC directly to me
>(p.nikolich@ieee.org).
>
>Regards,
>
>- Paul Nikolich
>Chairman, IEEE 802 LMSC
>
>
>----- Original Message -----
>From: <k.mccabe@ieee.org>
>To: <paul.nikolich@att.net>
>Cc: <bob.grow@ieee.org>
>Sent: Wednesday, February 11, 2004 11:33 AM
>Subject: IEEE 802.3ak news release
>
>
>
>Paul,
>
>
>The attached draft of the IEEE 802.3ak press release for 10 gigabit
>Ethernet on copper wire has been approved by Bob Grow and Dan Dove.  It has
>also been blessed by the communications people at HP ProCurve, Dan's
>organization.  It can now ready to go to the 802 EC for approval.
>
>
>Thanks!
>
>
>
>
>
>(See attached file: PR_802.1ak_fin.doc)
>
>
>Karen McCabe
>Senior Marketing Manager, IEEE Standards
>445 Hoes Lane, PO Box 1331
>Piscataway NJ 08855 USA
>PH: +1 732 562 3824
>email: k.mccabe@ieee.org
>http://standards.ieee.org
>