RE: [802SEC] +++IEEE 802 EC motion+++ motion to approve a press release--need mover and seconder
Bob,
Its definitely not municipal:
"1 : of or relating to the internal affairs of a major political unit
(as a nation)"
Metropolitan is the correct expansion, even though 802.16 is not limited
to use within metropolisis, so maybe we should define the QWAN (Quite
Wide Area Network) or if we want to be really picky, the RUSMAN (Rural,
Urban, Suburban and Metropolitan Area Network).
Maybe not.
DJ
-----Original Message-----
From: owner-stds-802-sec@majordomo.ieee.org
[mailto:owner-stds-802-sec@majordomo.ieee.org] On Behalf Of Bob O'Hara
Sent: Monday, January 19, 2004 10:35 AM
To: Paul Nikolich; IEEE802
Subject: RE: [802SEC] +++IEEE 802 EC motion+++ motion to approve a press
release--need mover and seconder
I will make the motion.
I have a comment, though, on the press release.
In the second paragraph: is .16 a "municipal" area network? I thought
it was "metropolitan" area.
-Bob
-----Original Message-----
From: owner-stds-802-sec@majordomo.ieee.org
[mailto:owner-stds-802-sec@majordomo.ieee.org] On Behalf Of Paul
Nikolich
Sent: Monday, January 19, 2004 9:33 AM
To: IEEE802
Subject: [802SEC] +++IEEE 802 EC motion+++ motion to approve a press
release--need mover and seconder
Dear EC members,
I would like to entertain a motion to approve the attached press
release, however,I need a mover and seconder. If you are willing to
move and/or second please notify me immediately. I will conduct the
email vote as soon as I have a mover/seconder.
This would be a 10 day SEC email ballot to make a determination by EC
motion to approve the attached Press Release. Please note I have placed
a modifier on the closing time of the ballot such that it may close no
later than 10 days after the start of the email ballot or as soon 24
hours after every member of the EC casts a definitive ballot (APP, DIS
or ABS). The reason for the modifier is to allow the press release, if
it is approved, to be issued as quickly as possible.
Motion
The LMSC executive committee approval of the attached press release on
the approval of IEEE 802.16/Conformance02, IEEE 802.2 reaffirmation,
IEEE 802.5 reaffirmation by the Standards Board.
Moved by : TBD
Seconded by: TBD
The email ballot opens on TBD EST and closes the sooner of TBD+10days
EST or 24 hours after every member of the EC has cast a ballot,
whichever comes first.
Please direct your responses to the EC reflector with a CC directly to
me (p.nikolich@ieee.org).
Regards,
- Paul Nikolich
Chairman, IEEE 802 LMSC
----- Original Message -----
From: <k.mccabe@ieee.org>
To: <p.nikolich@ieee.org>
Cc: <k.kenney@ieee.org>
Sent: Monday, January 19, 2004 11:15 AM
Subject: press release
> Hi Paul,
> As part of our overall PR program, after each IEEE-SA Standards Board
> meeting we develop brief news releases announcing project and
standards
> approvals. We drafted the attached released for the approved 802
standards.
>
> Per the PR review protocol in place, I'm forwarding this to you since
the
> release covers three 802 standards: the approval of IEEE 802.16
Conf.02
and
> the reaffirmation of IEEE 802.2 and IEEE 802.5.
>
> Please advise if you would like for us to continue with the release
and if
> you would like for us to coordinate approval of the release by the EC.
>
> Thanks!
> Karen
>
> (See attached file: PR_802s.doc)
>
> Karen McCabe
> Senior Marketing Manager, IEEE Standards
> 445 Hoes Lane, PO Box 1331
> Piscataway NJ 08855 USA
> PH: +1 732 562 3824
> email: k.mccabe@ieee.org
> http://standards.ieee.org
>