RE: Response to SC6 N11216
Thanks Jim,
Yes, this version is much better than the previous one. I agree now with
sending.
Vic
> ----------
> From: Jim Carlo[SMTP:jcarlo@ti.com]
> Sent: Thursday, December 02, 1999 20:05
> To: Hayes, Vic (Vic); 802.0 reflector
> Cc: Tasker, Robin
> Subject: RE: Response to SC6 N11216
>
> Good question. I have removed the confusion, but deleting the reference to
> chair of SC6 in the letter. I believe because I am sending also to Herb
> Bertine as SG7 Chair, it is OK to come from chair of 802.
>
> Jim Carlo(jcarlo@ti.com) Cellular:1-214-693-1776 Voice&Fax:1-214-853-5274
> TI Fellow, Networking Standards at Texas Instruments
> Chair, IEEE802 LAN/MAN Standards Committee
>
> -----Original Message-----
> From: Hayes, Vic (Vic) [mailto:vichayes@lucent.com]
> Sent: Tuesday, November 30, 1999 2:57 AM
> To: 802.0 reflector; jcarlo
> Cc: Tasker, Robin
> Subject: RE: Response to SC6 N11216
>
> Jim,
>
> Is it appropriate to send an 802 statement as the Chairman of the
> SC6 group? It would give the wrong weight to the letter.
>
> I would advise that the letter would be sent by Geoff.
>
> Vic
> <<File: 802-11216.pdf>>
> ----------
> From: Jim Carlo[SMTP:jcarlo@ti.com]
> Sent: Tuesday, November 30, 1999 06:44
> To: IEEE802
> Cc: Robin Tasker
> Subject: Response to SC6 N11216
>
> <<File: 802-R11216.PDF>>
> After various feedback from Geoff Thompson,Tony Jeffree, Roy
> Bynum, and Herb
> Bertine (Chair of ITU-T, SG7), I plan to send the following
> attached file
> (content also in text at bottom of message) as a response to
> SC6 N11216,
> which is actually a request from the ITU for information on
> the Draft
> Recommendation on Ethernet Frame over SDH/WDM, which is
> TD3151/Rev.1.
>
> Jim Carlo(jcarlo@ti.com) Cellular:1-214-693-1776
> Voice&Fax:1-214-853-5274
> TI Fellow, Networking Standards at Texas Instruments
> Chair, ISO/IEC JTC1/SC6 Telecom and Info Exchange Between
> Systems
> Chair, IEEE802 LAN/MAN Standards Committee
>
> ++++++++++++++=
> Subject: Response to SC06 N 11216 (Comments on draft
> Recommendation on
> Ethernet Frame over SDH/WDM)
>
> Reference: SC06 N 11216 Liaison Statement Request
> Q.10/7 TD 3155/Rev1 Liaison Statement
> Request
> Q.10/7 TD 3151/Rev1 Draft Recommendation
>
> At the IEEE 802 Plenary Meeting (8Nov99 - 12Nov99) the draft
> document
> TD3155/Rev.1 was considered as an item but no technical
> response could be
> prepared. The details that are asked for are somewhat
> outside the current
> experience base of 802.3 voting membership. The 802.3
> Working Group is
> composed of experts in the CSMA/CD Access Method and devices
> (MACs) built up
> on that base as well as experts in building physical layers
> that provide
> coding and transmission interfaces between the MAC and LAN
> physical media
> (twisted pair and fiber).
>
> As part of the new work proposal now before the IEEE-SA
> Standards Board on
> 10Gigabit Ethernet, IEEE 802.3 is building up its technical
> expertise in
> SONET,SDH, and related wide-area transport mechanisms. I
> hope that we can
> be in a better position to respond to communication requests
> on this topic
> in the future.
> ++++++++++++++++++++
>
>